Product
English > Product > Accelerometer >

Accelerometer


Name:IEPE Vibration Velocity Accelerometer ELA60

Model:ELA60

Category: Accelerometer

Date:2012-07-20 14:27

Overview:ELA60 IEPE velocity senor Rugged design Corrosion resistant 100mV/IPS sensitivity EMI/RFI shielded

Favorite

Product Description

Features
IEPE velocity senor
Rugged design
Corrosion resistant
100mV/g sensitivity
EMI/RFI shielded
 
Sub-model:                  ELA60A                                      ELA60B
Axis:Single
Range:                           ±10IPS                                      ±50IPS
Voltage sensitivity @ 160Hz:500mV/IPS ±10%       100mV/IPS±10%
Frequency response (±3dB):    3~5k Hz                     2.5~7k Hz
Resonance frequency:>10kHz
Transverse sensitivity:<5% (max.)
 
Electrical
Excitation voltage: 18~30Vdc
Supply current: 2~10mA
Bias output voltage:12~14Vdc
 
Environmental
Temperature range:-55~+120ºC
Shock limit:2000g peak
 
Physical
Sensing element:PZT ceramics
Sensing element design:Shear
Case materials:316L stainless steel
Connector:2 pin, MIL-C-5015
Mounting hole:¼-28 UNF tapped hole
Mounting torque:3~5N-m
Dimensions:Ø22mm x 51±1mm
Weight:120gram
 
The above performance specifications conform to JJG 233-2008 piezoelectric accelerometer and are typical values, referenced at +24ºC, 24Vdc supply, 4mA, and 160Hz, unless otherwise noted. Calibration data, traceable to National Institute of Standard and Technology (NIST), is supplied.
The output of the sensor is original vibration signal. And it is suitable for wave profile acquisition.
Maximum cable length should be less than 30m.
Excitation overload is not permitted.

Copyright © 2012 Eluox Automation. All rights reserved.Home | Profile | Information | Contact        Tel:+86(0)28 8626 7110     Fax:+86(0)28 8626 6618    Email:eluox@yahoo.com